Bonjour
Je viens de mettre à jour TTQV3 avec la dernière version disponible.
J'ai voulu ensuite décharger mon garmin 76 connecté au port com1 de ses traces et wpts dans TTQV et j'ai un message d'erreur 0 avec device non reconnu alors que le GPS fonctionne en gps online?
La connexion est donc ok en online mais il y a refus de connexion pour décharger le gps!
TTQV est sur garmin et port com1 et le gps sur garmin aussi...
Une idée?
merci
marc donzel
erreur code 0
-
-
Hi,
Il faut mettre le GPS aux mode GARMIN/GARMIN, aussi, il faut mettre TTQV3
au mode Garmin/Garmin. Peut-être les deux sont mettez aux NMEA/NMEA.Ca marche maintenant ?
-
Bonjour et merci de ta réponse en francais!
Tout est bien en garmin/garmin, c'est pour cela que je ne comprends ce code d'erreur que je vois pour la premiere fois alors que j'utilise ttqv depuis plusieurs années...
marc -
J'ai tout vérifié...
Le garmin 76 décharge avec pathaway sur palm mais bloque sur ttqv.
Le message d'erreur est:
Error in Garmin-Datatransfer
Errorcode:0
No response from deviceAlors que cela marche avec gps online, ttqv affiche la position du gps en simulation..
-
Hi,
Peut-être reinstaller (sans deinstallation) le TTQV3.0.131 setup complet
peut aider ! -
J'ai réinstallé la mise a jour sans changement.
Par contre j'ai contourné le probleme en passant par Pathaway avec importation des traces et wpts.
Mais, alors que les wpts dans pathaway sont en position Ouest de greenwich, après l'importation, ils sont en Est dans TTQV....
Je n'arrive pas à modifier les wpts d'est en ouest
désolé
marc -
Hi,
Zitat von "marc donzel"J'ai réinstallé la mise a jour sans changement.
No!!! J´ai demander de installer l´installation complet, ne pas le "mise a jour" !ZitatMais, alors que les wpts dans pathaway sont en position Ouest de greenwich, après l'importation, ils sont en Est dans TTQV....
Je n'arrive pas à modifier les wpts d'est en ouest désolé marc
Qùelle version de PW exactement ?
Palm ou PPC ? -
Pathaway version 3.01b30
Je serai absent 1 semaine et réinstallerai TTQV au retour.
Merci de tes réponses
marc -
Bonjour
Je reprends le sujet après les vacances
J'ai donc réinstaller entièrement TTQV et j'ai refait un essai.
TTQV et le GPS garmin 76 sur garmin, liaison port com1 correctement configuré;
TTQV reconnait le gps en online et affiche la position du gps en simulation.
Quand je lance une décharge du gps dans ttqv, tracks et wpts, refus et code 0, gps non reconnu...
Je suis perplexe car cela marche en online et pas en decharge du gps???
merci
marc -
Hi,
TTQV and the Garmin GPS must both be in Garmin/Garmin mode
to transfer waypoints....
Online mode also works if both devices are in NMEA mode. -
Hi and thanks
My garmin 76 is in garmin/garmin...of course!
An other idea?
marc -
Hi,
- tell me more about the cable in use to connect GPS/TTQV, length, adapters,
segments ?
- can you use an other com-port for testing purposes
- did you restart your PC, close all softwware runnign in backgorund,
specially software like "Hotsync"... close whatever software is able to
make a serial connection, whether it is configured to do so or not. -
Hi
The cable is from garmin, it's the same from 10 years minimum...
I used quovadis and after ttqv, all "versions"...
I don't understand why it's OK online and not OK for the wpts and tracks.
I will try this evening without Hotsync
Thanks
marc -
Hi Marc,
Zitat von "marc donzel"Hi
The cable is from garmin, it's the same from 10 years minimum...
I used quovadis and after ttqv, all "versions"...
I don't understand why it's OK online and not OK for the wpts and tracks.
I will try this evening without Hotsync
Thanks
marc
a) well, if it is 10 years old, maybe one wire is damaged or the plug has
a bad contact
b) you may have installed/running other com-port enabled software
that keeps TTQV from retrieving data. Please shut shut down everything
running in backgground that is not required.
c) maybe install the latest TTQV3 update, which now is 3.0.135!
d) do not have the GPS attached/running on your PC, while Win2k/XP
is started. Start PC, then connect the GPS.ZitatI don't understand why it's OK online and not OK for the wpts and tracks.
Yes, I also peferr, if soemthing breaks completely, this makes trouble
shooting easier. -
hi
I'm sorry!!
The cable is OK, garmin 76 is OK ( garmin/garmin), Hotsync isn't on port com1, I have installed ttqv and the latest version...
Online ttqv and the 76 are OK
And...when I try the transfert, I have:
- At first: "Error in Garmin Data Transfer, Error code 0, No response from device"
- then: "tracks-records n'est pas supporté par cette version de GPS/logiciel Garmin, No data in garmin"
- and after: "QVError: 91 about_window_Load variable objet ou variable bloc With non definie"but garmin 76 is OK online......
marc -
Hi Marc,
Zitat von "marc donzel".... Hotsync isn't on port com1, I have installed ttqv and the latest version.......
This does not matter, please shut it down while you try to download data,
also shut down all other resident software in system tray
while trying to connect.!Please make a screenshot of your entire screen as the message:
"tracks-records n'est pas supporté par cette version de GPS/logiciel
Garmin, No data in garmin" appears and send me the screenshot, service@ttqv.com !- Did you reset TTQV3 do defaults ?
- did you run "compress" on TTQV3 databases ?
- did you try using an other com-port ?
- maybe get hold of a USB serial converter to see, wheter transfer
works using such a device over USB ports ?